Lineguard UF-100 "Ultrafiltration" System

APPLICATIONS

• Healthcare centers and dental clinics, where people are at a particularly high risk of infection from water borne pathogens
  
• Hotels and restaurants, to guarantee safe and high quality water for drinking water and food preparation
  
• Whole House water treatment to improve tap and particularly well water quality

GENERAL INFO 

The quality and safety of water entering a home or commercial building is of vital importance, especially when the source of the water is below standard or when the application requires a higher quality. In these situations the best solution is Pentair’s LineGuard UF-100 compact water system, which filters water at the point where it enters the commercial facility or the home.

The LineGuard system is built around reliable, state-of-the-art Ultrafiltration (UF) membrane modules, which are successfully used in the world’s most advanced water purification plants. The UF modules consist of billions of microscopic pores, small enough to retain all microorganisms, including bacteria, viruses and cysts, sediment and 
turbidity, but large enough to allow vital minerals to pass through. 

FEATURES  |  BENEFITS

• Programmable Controller for system status check and custom flush settings
  
• Time, volume and pressure drop driven backwash cycles
  
• Operates on water line pressure, no pump required
  
• Low energy consumption
  
• High efficiency, minimal waste water discharge
  
• High flow rate, even at low water pressure
  
• Low maintenance requirements

STORAGE & HANDLING

During storage the modules must be dry

After first use the product must be protected against freezing

Handle with care; do not expose to shocks or excessive water hammer

COMPLIANCE 

Biological retention
Viruses (2): >99.99% (log 4)
Bacteria (3) >99.99999% (log 7)

Material safety
Extraction tests according to NSF/KTW

Structural integrity tested at
Hydrostatic pressure 2 bar (175 psi)

CERTIFICATIONS

• NSF P231 compliant
  
• UL compliant
  
• KIWA ATA (pending)

PERFORMANCE 

Initial flow rate(1) 60 l/min @ 2 bar (16 gal/min @ 29 psi), sufficient for 4 tap connections

Total capacity(1)
> 5.000 m3 (1.32 Mgal)

System efficiency(1)
> 98%

Cleaning cycles
Backwash and forward flush

Control unit
Type CWS EC 2

Menu language
English, German, Spanish, French

Input data
Cleaning cycle parameters

Output data
Total volume, pressure drop, 
performance indication

Membrane area
4.5 m2 (48.5 sq. foot) per module

Technology
Capillary ultrafiltration membranes

Module type
Aquaflex 4.5

Number of modules per system
2

OPERATING CONDITIONS 

Ambient temperatures
Min +1°C, max +50 °C (34 °F, 122 °F)

Storage temperature
Min +1°C, max +50 °C (34 °F, 122 °F)

Feed water temperature
Min +1°C, max +40 °C (34 °F, 104 °F)

Relative humidity
Up to 100%

Supply voltage
90-264 VAC

Power consumption during 
cleaning
Max. 20 W

Power consumption during 
filtering
Max. 1 W

Maximum inlet pressure
4 bar/58 psi

CONNECTIONS 

Connection to system
CWS Quick-Connect 

Feed water
22 mm, 3/4 inch
(solder or compression fitting)

Permeate
22 mm, 3/4 inch
(solder or compression fitting)

Connection to drain
22 mm, 3/4 inch
(solder or compression fitting)

DIMENSIONS & WEIGHT 

Product:
Height: 1150 mm
Width: 316 mm
Depth: 209 mm
Weight: 40 kg

Packaging:
Length: 1200 mm
Width: 400 mm
Height: 350 mm
Weight: 38 kg